High power evacuation warning siren for residential areas - APPROVAL NUMBER TRADITIONAL SYSTEM: 1328-CPR-0471
DEVICE STRUCTURE
• FRONT COVER with vents (allowing sound emission) and with LED light
• self-diagnosis: an automatic control test is carried out every 24 hours relating to absence of mains power supply, low battery charge, interruption of the magneto-dynamic unit.
TRADITIONAL SYSTEM
A relay with a C-NC-NO contact (normally open) allows remote localization of fault signal
FUNCTION
4 levels of alarm (warning, evacuation, all clear, fire alarm)
The sound relating to the fire alarm is activated by means of polarity inversion by the Fire Alarm Control Box, according to UNI EN 54-3 Norm.
IMPORTANT: it is possible to combine four luminous signals tofour sounds:
LEVEL 1 | WARNING | AMBER
LEVEL 2 | EVACUATION | RED
LEVEL 3 | ALL CLEAR | GREEN
LEVEL 4 | FIRE ALARM | LUMINOUS PANEL
A dip-switch allows four sound options to be selected from a total of eight to be combined to the priorities established.
FRONT LED LINEAR DEVICE
Three-colour LED light for control functions:
GREEN FLASHING LED LIGHT = INDICATES THAT THE DEVICE IS ON, the presence of electricity and good operation. The green light is deactivated during any alarm situation
AMBER FLASHING LED LIGHT = INDICATES A FAULT: no mains power supply, low battery level or loudspeaker interrupted
RED FLASHING LIGHT = INDICATES AN ALARM SITUATION
PROGRESSIVE SOUND
This function, starting from a min. sound output of 75dB reaching the max. levelset within 10 sec., avoids distress to the people in the area. The device has a potentiometer to regulate the max. sound level required This function is deactivated by means of the DIP-selector
TRADITIONAL SYSTEM: SEL 1SEV/4S-AA has a Superheterodyne 433,92 Mhz RADIO RECEIVER – interfaced with the electronic equipment for testing purposes (warning/evacuation) by means of REMOTE CONTROL with a programmable access code as required by the user (1.024 combinations)supplied with a pre-registered
| Approvals | CE²⁰ EN54-3 |
|---|---|
| Dimensions (mm) | 320 x 202mm |
| Manufacturer/Brand | Sirena |
| Colour | Grey |
| Ingress Protection | IP31 C |
| Operating Temperature | -10 to +55℃ |
Click on any of the following links to download the file.
Specialist distributor Switchtec has strengthened its sales team with the appointment of Mike Careless as Midlands Area Sales Manager.
Switchtec has released Issue 10 of its Electrical Control Components Catalogue, now exceeding 175 pages and offering an expanded range of products for electrical wholesalers, panel builders, OEMs, and industrial users.
Switchtec has expanded its well-established SCL RCD switched socket and spur outlet range with the introduction of a new plastic-clad option, complementing the existing and popular metal-clad versions already widely specified for commercial and industrial installations. The extended range gives installers, OEMs and specifiers greater choice of finish and installation suitability, while maintaining the same focus on point-of-use safety and robust performance.
Switchtec announces the availability of the BKF Series Compact Single Pole Terminal Blocks, a high-performance solution engineered for reliable power distribution in industrial control panels and electrical systems where space, safety, and efficiency are critical.
Login
Offers
Basket 
01785 818600